Shroud Installation

The installation is pretty straighforward.

Some important point: 

  • Do not use the original screws, the are too long and will break your hashboard
  • Fan spoofers should be working, but some recent Bitmain variant will not detect them. If you are in this situation the only solution is to use a 3rd Party OS like Braiins. 
  • PSU fan can be kept on with the shroud, can be disconnected but still be present in the PSU or can be fully removed in almost all ASICs.
  • PSU fans do not requiert spoofers to be disconnected.
  • If you remove PSU fan, 2 small plastic bars with hole will let you screw the PSU screws instead of using the fans.

 

Installation procedure

  • Remove all fans and screws
  • You will now have to remove the screws securing the control board on the top part of the miner.
  • Remove fan from ports on the control board
  • The fan spoofers are to use on the fan ports on the control board (Attention some s19k only have 2 regular fan ports, they are not compatible with spoofers)

  • You can screw the Shroud in place of the front and back fans.
  • Secure the shroud using the included screws if you took the KIT version
    • DO NOT USE ORIGINAL SCREWS, THEY ARE TOO LONG
  • The PSU part can be secured using the original screws on the internal PSU fans.

     

    • Optional (not applicable to KS3M): To maximise performance, you can remove the PSU fans.
    • ** BE CAREFUL TAKE ALL THE REQUIRE PRECAUTION, HIGH VOLTAGE**
      • Disassemble the PSU part 
      • Remove the PSU fan connectors
      • There is no need to use spoofers for PSU fans
      • Unscrew the fans
      • Take the 2 small bars with holes provided

      • Use the original fan screws to secure the PSU part

    Close everything back and enjoy :)